人工催熟日本鳗鲡精子的显微和超微结构
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

科技部科技基础性工作专项资助


Microstructure and ultrastructure of spermatozoa of Anguilla japonica artificially induced by extraneous hormone
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    对经人工催产获得的日本鳗鲡(Anguilla japonica)精子的显微和超微结构进行了观察。光镜下观察,日本鳗鲡精子有两种形态结构,一种精子的细胞核为圆形或近 似圆形,这精子较小,细胞核长径为(2.57±0.62) μm,短径为(2.11±0.59) μm,鞭毛长度为(38.35±7.71) μm;另外一种精子的细胞核为“眉形”或“新月形”,精子较大,细胞核长径为(7.66±1.09) μm,短径为(2.54±0.46) μm,鞭毛长度为(38.35±9.02) μm。透射电镜观察结果显示:圆形精子头部的顶端无顶体,植入窝位于细胞核底端的中间,由细胞核向内凹陷而成,呈一沟状,其走向与精子的长轴平行。中心粒复合体位于植入窝内。细胞核的下端有2~3个线粒体。基体的头端呈筒状,由电子致密物构成。基体的尾端分裂成9束。尾部从袖套腔中伸出且细长,轴丝始端与基体的尾端相连,微管多呈电子致密状,轴丝为典型的“9+2”结构。圆形精子为日本鳗鲡正常成熟的精子。“眉形”或“新月形”精子头部细胞核弯曲,在弯曲处有一圆形的球状物,球状物内含有线粒体和中心粒复合体,轴丝为“9+0”结构。这种精子可能存在发育缺陷或没有达到完全正常成熟。

    Abstract:

    The microstructure and ultrastructure of the spermatozoa of Japanese eel, Anguilla japonica, (n=10) artificially induced by extraneous hormone were studied. By means of light microscopy, two types (type I and type II) of spermic shapes could be observed. The spermic head of type I was almost round in shape, and similar to the shape of strawberry. The size of type I spermatozoa was smaller, with (2.57±0.62) μm of the long diameter of the karyon, (2.11±0.59) μm of the short diameter of the karyon, and (38.35±7.71) μm of the flagellum length. The spermic head shape of type II was similar with the shape of eyebrow or crescent. This size of type II spermatozoa was much bigger, with 7.66±1.09 μm of the long diameter of the karyon, (2.54±0.46) μm of the short diameter of the karyon, and (38.35±9.02) μm of the flagellum length. By means of transmission electron microscopy (TEM), different ultrastructures of two types of spermatozoa could be observed. For type I spermatozoa (round spermatozoa), there was no acrosome on the forefront of the spermic head. Implantation fossa was located in the middle of the spermic head bottom, and it is in the shape of a channel along the long axis of spermatozoa. The centriolar complex was inside implantation fossa. Two to three pieces of mitochondria were under karyon. The head of basal body was co lumniform in shape, and consisted of electron density substance. The end part of basal body was separated into 9 strips. Spermic flagellum prolongated from the sleeve, and the initial part of axoneme linked up the end part of basal body. The microtubule was electron dense. The axoneme formed a typical 9+2 pattern. Type I spermatozoa might be normal spermatozoa that reached to maturity. For type II spermatozoa (eyebrowlike spermatozoa), the karyon was curving in shape, and there was a globoid object in the curving area. There were mitochondria and centriolar complex inside the globoid object. The axoneme formed a 9+0 pattern. Type II spermatozoa might be immature or abnormally developed spermatozoa.

    参考文献
    相似文献
    引证文献
引用本文

章龙珍.人工催熟日本鳗鲡精子的显微和超微结构[J].水产学报,2006,30(5):611~617

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2008-05-07
  • 最后修改日期:2008-05-07
  • 录用日期:2008-05-07
  • 在线发布日期: 2008-05-14
  • 出版日期: